Updates and Changes: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
=Raising CW Plate- and Screen-Voltages= |
=Raising CW Plate- and Screen-Voltages= |
||
Collins' reduction in High Voltage and Screen Voltage when using CW mode held back the 4CX1500B gain, and total-power. I was almost at the point of using the SSB setting for CW, when Chet VE3CFK pointed out... |
|||
That feeding both the primary wires from the front-panel-switch to the SSB connections on the transformer would give me a constant 3kV and raised Screen, no matter the mode. In fact, doing this means the only difference between SSB and CW is the negative grid-bias, and the resulting Class of operation. |
That feeding both the primary wires from the front-panel-switch to the SSB connections on the transformer would give me a constant 3kV and raised Screen, no matter the mode. In fact, doing this means the only difference between SSB and CW is the negative grid-bias, and the resulting Class of operation. |
||
Revision as of 14:17, 28 May 2020
Raising CW Plate- and Screen-Voltages
Collins' reduction in High Voltage and Screen Voltage when using CW mode held back the 4CX1500B gain, and total-power. I was almost at the point of using the SSB setting for CW, when Chet VE3CFK pointed out...
That feeding both the primary wires from the front-panel-switch to the SSB connections on the transformer would give me a constant 3kV and raised Screen, no matter the mode. In fact, doing this means the only difference between SSB and CW is the negative grid-bias, and the resulting Class of operation.
The realization of Chet's suggestion: simply moving the CW-primary-power wire from Term #1 to Term #2, and similarly moving Term #6 to Term #5:
Now I have good gain and total power! Thanks, Chet! Here's a view of comfortable operating conditions now, for CW:
